| |
|
|
|
|
|
At temperatures below 18°C (65°F) crystal formation may occur in Immersol 518F & 518N
immersion oils (both during shipping or regular storage). This is due to the isomerism of the
main component Di-(TCD–methylol) – adipate (DTCDMA) and our demands on the purity.
Two methods for dissolving these crystals are possible:
1. They can be dissolved by heating to 50-60°C (120 – 140°F) in a waterbath or a drying
oven. The cap of the bottle(s) must be opened but need not be removed, to allow for
thermal expansion and to avoid pressure build-up. It is important that the crystals are
completely dissolved
|
Company:
Date:
January 07, 2009
|
|
|
|
|
|
|
|
|
|
Microscope Immersion Oils
|
Company:
Date:
January 07, 2009
|
|
|
|
|
|
|
|
|
|
First aid measures
Inhalation : Move to fresh air. If symptoms persist, call a physician.
Skin contact : Wash off with soap and water.
Eye contact : Rinse immediately with plenty of water for at least 5 minutes. If
symptoms persist, call a physician.
Ingestion : Clean mouth with water and drink afterwards plenty of water. If
symptoms persist, call a physician.
|
Company:
Date:
January 07, 2009
|
|
|
|
|
|
|
|
|
|
Microscope Immersion Oils
|
Company:
Date:
January 07, 2009
|
|
|
|
|
|
|
|
|
|
Microscope Immersion Oils
|
Company:
Date:
January 07, 2009
|
|
|
|
|
|
|
|
|
|
Fire-fighting measures
Suitable extinguishing
media
: carbon dioxide (CO2), dry chemical, foam, water spray jet
Extinguishing media which
must not be used for safety
reasons
: high volume water jet
Hazards caused by the
substance/combustion
products/origin of gases
: In case of fire formation of carbonoxides and other toxic
gases/vapors possible. In the event of fire and/or explosion do
not breathe fumes.
Special protective
equipment for fire-fighters
: In the event of fire, wear self-contained breathing apparatus.
|
Company:
Date:
January 07, 2009
|
|
|
|
|
|
|
|
|
|
First aid measures
General advice : Remove and wash contaminated clothing before re-use.
Inhalation : Provide with fresh air. In the case of inhalation of aerosol/mist
consult a physician if necessary
Skin contact : Wash off with soap and plenty of water. In the case of skin
irritation or allergic reactions see a physician.
Eye contact : Rinse immediately with plenty of water for at least 5 minutes. If
symptoms persist, call a physician.
Ingestion : Rinse mouth. Only trained first-aid staff may induce vomiting.
Consult a physician.
|
Company:
Date:
January 07, 2009
|
|
|
|
|
|
|
|
|
|
First aid measures
General advice : Remove and wash contaminated clothing before re-use.
Inhalation : Not applicable.
Skin contact : Wash off with soap and water. Use re-greasing skin cream.
Eye contact : Flush eye(s) immediately with plenty of water. If eye irritation
persists, consult a specialist.
Ingestion : Rinse mouth. Do not give anything to drink or eat. Do not induce
vomiting. Call a physician.
|
Company:
Date:
January 07, 2009
|
|
|
|
|
|
|
|
|
|
HAEMOCYTOMETERS
HAEMOMETER/HAEMOGLOBINOMETER
HALOGEN LAMPS/PIPETTES/TIMERS MECHANICAL/ DIGITAL/CAPPILARY TUBES TOP TECH/COLONY COUNTERS/COLONY COUNTER DIGITAL TABLE MODEL/COLORIMETER/COLORIMETERS- PHOTO COLORIMETERS/COLORIMETER & SPARES/COUNTING CHAMBERS/EYE TONOMETER/GLUCOMETER/ MICROPIPETTES/MICROSCOPES/MICROSLIDES & COVER GLASS/NEBULIZER/OIL IMMERSION LENS / OPTHALMOSCOPE/OTOSCOPE/PEDOMETER/PETRI DISC/PULSE OXIMETER/RETINOSCOPES/STAGE & OCCULAR MICROMETER/ULTRA VIOLET TUBES PHILIPS HOLLAND
|
Company:
Date:
January 12, 2010
|
|
|
|
|
|
|
|
|
|
Resolve Immersion Oil is manufactured using a proprietary process that removes interfering substances and will not damage valuable optics or irreplaceable slide specimens. Resolve is available in both low and high viscosity, is non-drying and non-hardening, and has a refractive index of 1.5150.
Resolve contains no PCB’s, eliminating toxicity and disposal problems and is conveniently packaged in four sizes.
|
Company:
Date:
January 07, 2009
|
|
|
|
|